Stainless Steel Sheet Coil Series And Performance

- May 19, 2017-

  Stainless Steel Sheet Coil 1: stainless steel plate: a cold-rolled plate and hot-rolled plate of the points, the surface of a bright side, matte, matte surface. Commonly known as stainless steel plate, 2B plate, BA board. In addition, according to customer requirements plating other light color The specifications of the sheet are: 1m * 1m 1m * 2m 1.22m * 2.44m 1.5m * 3m 1.5m * 6m, if the customer demand is large, we can cut the size of the customer. Plate, plating plate.

   Stainless Steel Sheet Coil 2: stainless steel pipe: seamless pipe and seam pipe (straight seam welded pipe, decorative pipe, welded pipe, pipe, light tube.) Stainless steel pipe has more than 200 kinds of standard specifications, the size of the tube is more expensive, especially the capillary The capillary is the worst produced by the 304 material, or the pipe is easy to burst, and the non - standard pipe can be customized for the customer. The seamless pipe is mainly used for industrial use, the surface is matte, not bright. Surface, the tube has a very thin welding line, commonly known as welded pipe, mainly used for decorative materials. Another industrial fluid tube, the pressure as the wall thickness decision .1010 and 310S for high temperature tube .1080 degrees below normal use, The maximum temperature reached 1150 degrees.

   Stainless Steel Sheet Coil 3: stainless steel bar: round bar, hexagonal bar, square steel, flat steel, hexagonal steel, round bar, solid rod. Hexagonal bar and square steel (flat steel) than the round bar expensive, (the company hexagonal bar specifications for imports High-quality materials.) Bright surface than the black leather surface of the large diameter of the bar mostly black bars. Of which 303 is a unique material in the bar, are easy to car (cut) type of material, mainly for automatic Cut on the lathe. Another: 304F.303CU.316F are also easy to cut materials.

   4: stainless steel (stainless steel): or called tape, coil, coil, coil. Call more, the hardness of the strip there are many, ranging from tens to hundreds of months, customers need to determine before buying (8K mirror brightness). The width of the coil is uncertain, there are: 30mm.60mm.45mm.80mm.100mm.200mm, etc. Also according to customer requirements for the sub-section.

   Stainless Steel Sheet Coil 5: stainless steel wire: also called stainless steel wire, wire rod, plate yuan, but with stainless steel wire rope is different. Wire mainly spring and screw two, as the name suggests: screw thread is mainly used for screws, and spring wire used Such as bright lines, hydrogen retreat lines, electrolytic lines, axle hairpin lines, etc. Tensile strength of 1500-2000. The hardness of the spring line are the following: the whole soft | 1/4 hard | semi-hard | 3/4 hard | full hard | special hard. Wire rope specifications: 7 * 1,6 * 12,7 * 7,7 * 19,17 * 39, , Stainless steel is a kind of high alloy steel which can resist corrosion in air or chemical corrosive medium. Stainless steel is a kind of high-alloy steel with beautiful surface and good corrosion resistance, It is not necessary to undergo surface treatment such as plating, and to play the inherent surface properties of stainless steel, used in a wide range of steel, often called stainless steel. On behalf of the performance of 13 chrome steel, 18-8 chrome nickel steel and other high alloy steel.